Everpure S-100 Product Specification
The Everpure S-100 Drinking Water System is the practical solution for filtering out disinfectant chlorine, dirt, rust, asbestos fibers, microscopic protozoan cysts and other particulates from drinking water, including oxidized iron, manganese and sulfides.
The Everpure S-100 Drinking Water System reduces or removes the following contaminants: *
- Bad tastes and odors
- Chlorine
- Dirt and cloudiness
- Giardia lamblia cysts
- Entamoeba histolytica cysts
- Cryptosporidium parvum cysts
- Mold and algae
- Asbestos fibers
- Oxidized iron
- Oxidized manganese
- Oxidized sulfides
- 99.9+% of all particles ½ micron and larger in size
* See Performance Data Sheet for specific contaminant removal data. Available upon request.
This drinking water system must be maintained according to the manufacturer’s instructions, including replacement of filter cartridges.
The substances reduced or removed by this system are not necessarily in your water. But it is comforting to know that the right Everpure Drinking Water System can handle most any problem. Read the performance data sheet.
Flow Rate : Controlled at 0.5 gal/min. (1.9 L/min.)
Temperature : Cold water supply only, Max. 100ºF (38ºC)
Pressure : 10 – 125 psi (0.7 – 8.6 bar), non-shock
Capacity : 1,500 gal (5,670L)
Everpure Warranty
Everpure Drinking Water Systems are warranted to be free of defects for a full twelve (12) months after purchase. A detailed warranty statement is provided with each system.
So, what is the price?
Special promotion price, RM 1,497.
Price inclusive standard installation.
No hidden cost. No surprise charges.
Click WhatsApp
Button Below
Order today
and get a FREE
drinking water faucet.
